Owners Manual

Figure 28. Removing and installing a processor
1
close rst socket-release lever 2 pin-1 indicator of processor
3 processor 4 slot (4)
5 processor shield 6 open rst socket-release lever
7 socket 8 socket keys (4)
Next steps
1 Replace the processor.
2 Install the heat sink.
3 Reinstall the cooling shroud.
4 Follow the procedure listed in the After working inside your system section.
Installing a processor
Prerequisites
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Keep the Phillips #2 screwdriver ready.
4 If you are upgrading your system, download the latest system BIOS version from Dell.com/support and follow the instructions
included in the compressed download le to install the update on your system.
78
Installing and removing system components