Owners Manual

2 Turn o the system, including any attached peripherals.

3 Disconnect the system from the electrical outlet and disconnect the peripherals.

4 If installed, remove the optional bezel. For more information, see the Removing the optional front bezel section.

5 If installed, remove the front bezel.

Steps

1 Rotate the latch release lock counter clockwise to the unlocked position.

2 Lift the latch toward the back of the system.

The system cover slides back and the tabs on the system cover disengage from the slots on the chassis.

NOTE: The position of the latch may vary depending on the conguration of your system.

3 Hold the cover on both sides, and lift the cover away from the system.

Figure 9. Removing and installing the system cover

latch release lock 2 latch

3 system cover

Next step

1 Install the system cover.

Installing the system cover

Prerequisites

1 Follow the safety guidelines listed in the safety instructions section.

2 Ensure that all internal cables are connected and placed out of the way and no tools or extra parts are left inside the system.

Installing and removing system components