Owners Manual

3 Fit the free end of the bezel onto the system.

4 Lock the bezel by using the key.

Figure 8. Installing the optional front bezel

release latch 2 lock

3 front bezel

Removing the optional front bezel

Prerequisite

1 Follow the safety guidelines listed in the Safety instructions section.

Steps

1 Locate and remove the bezel key.

NOTE

: The bezel key is attached to the back of the bezel.

2 Unlock the bezel at the left end of the bezel.

3 Slide the release latch up and pull the left end of the bezel.

4 Unhook the right end, and remove the bezel.

System cover

The system cover protects the components inside the system and helps in maintaining air ow inside the system. Removing the system

cover actuates the intrusion switch which aids in maintaining system security.

Removing the system cover

Prerequisites

1 Follow the safety guidelines listed in the Safety instructions section.

Installing and removing system components