Owners Manual

About your system
The Dell Storage NX3330 is a rack system that supports up to two processors based on the Intel Haswell E5-2600 v3 processor
family, up to 24 DIMMs, and storage capacity up to eight internal, hot-swappable 2.5-inch hard disk drives (HDDs).
Topics:
• Front-panel features and indicators
• Back panel features and indicators
• Diagnostic indicators
• Hard drive indicator codes
• iDRAC Direct LED indicator codes
• NIC indicator codes
• Power supply unit indicator codes
• Locating your system Service Tag
Front-panel features and indicators
Figure 1. Front-panel features and indicators—8 HDD system
Table 1. Front-panel features and indicators
Item Indicator, Button, or
Connector
Icon Description
1 Turn on indicator, power
button
The turn on indicator glows when the system is turn on. The
power button controls the power supply unit (PSU) output to
the system.
NOTE: On ACPI-compliant operating systems (OSs),
turning off the system using the power button causes the
system to perform a graceful shutdown before power to
the system is turned off.
2 NMI button
Used to troubleshoot software and device driver errors when
running certain OSs. This button can be pressed using the end
of a paper clip.
Use this button only if directed to do so by qualified support
personnel or by the OS documentation.
3 System identification button The identification buttons on the front- and back panels can
be used to locate a particular system within a rack. When one
of these buttons is pressed, the LCD panel on the front and
the system status indicator on the back flashes blue until one
of the buttons is pressed again.
1
About your system 7