Owners Manual

Removing system cover
Prerequisites
1. Ensure that you read the Safety instructions section in this document.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
4. Remove the optional bezel. For more information, see the Removing the front bezel section in this document.
Steps
1. Turn the latch release lock to the unlock position.
2. Lift the cover release latch and remove the system cover.
Figure 9. Removing and installing the system
a. latch release lock
b. system cover
c. latch
Related references
Safety instructions on page 48
Related tasks
Removing the optional front bezel on page 50
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the
system.
Installing and removing system components
51