Owners Manual

Figure 34. Removing the optional SD vFlash card

a. SD vFlash card

b. SD vFlash card slot

Related References

Safety instructions on page 46

Removing the vFlash media unit

Prerequisites

1. Ensure that you read the Safety instructions section in this document.

2. Complete the tasks listed in Before working inside your system section in this document.

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that are shipped with your product.

Steps

1. Remove the screw securing the vFlash media unit to the chassis.

2. Remove the cable from the vFlash media unit and the backplane.

3. Slide the vFlash media unit toward the front of chassis and lift it out of the system.

Installing and removing system components