Owners Manual

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in Before working inside your system section in this document.
3. Remove the expansion card riser.
Steps
Press tabs on the riser 1 blank and push the riser 1 blank out of the chassis.
Figure 26. Removing and installing the riser 1 blank
a. slot on the chassis
b. tab (2)
c. riser 1 blank
Related References
Safety instructions on page 46
Related tasks
Before working inside your system on page 47
Installing the riser 1 blank
About this task
To install the riser 1 blank, align the blank with the slot on the chassis and insert it into the chassis until it clicks into place.
Removing expansion card risers
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
Installing and removing system components 77