Owners Manual

Figure 24. Removing an expansion card from expansion card riser 1
1. tab A 2. expansion card riser 1 cage
3. expansion card connector 4. tab B
5. latch 6. expansion card
Next steps
1. Install the expansion card.
2. Install the expansion card riser.
3. Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions on page 46
Related tasks
Before working inside your system on page 47
After working inside your system on page 47
Installing an expansion card into the expansion card riser 1
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the expansion card riser.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
NOTE: The expansion card riser 1 can be used only when both the processors are installed.
Installing and removing system components 75