Owners Manual

Figure 11. Removing a 3.5-inch hard drive blank
a. hard drive blank
b. release button
Next steps
If applicable, install the front bezel.
Related References
Safety instructions on page 46
Installing a 3.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 12. Installing a 3.5-inch hard drive blank
a. hard drive blank
Next steps
If applicable, install the front bezel.
Related References
Safety instructions on page 46
Installing and removing system components
59