Owners Manual

2. Lift the release latch next to the bezel lock.
3. Pull the left end of the bezel, unhook the right end and remove the bezel.
Figure 7. Removing and installing the front bezel
a. bezel lock
b. front bezel
Related References
Safety instructions on page 46
Installing the optional front bezel
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2. Hook the right end of the bezel onto the chassis.
3. Fit the free end of the bezel onto the system.
4. Lock the bezel by using the key.
Related References
Safety instructions on page 46
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the optional bezel.
48
Installing and removing system components