Owners Manual

Figure 55. Cabling diagram—3.5 inch (x12) SAS/SATA backplane—NX3230 (option 2)
1.
hard-drive backplane 2. system board
3. backplane signal connector 0 4. backplane signal connector 1
5. hard-drive mid plane 6. integrated storage controller card
7. backplane signal connector 2
Related References
Safety instructions on page 46
Related tasks
Before working inside your system on page 47
Installing HDD backplane
Prerequisites
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in the Before working inside your system section in this document.
110
Installing and removing system components