Owners Manual

Drive indicator codes
Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide information about the current status of
the drive. The activity LED indicator indicates whether the drive is currently in use or not. The status LED indicator indicates the power
condition of the drive.
Figure 3. Hard drive indicators
1. hard drive activity indicator
2. hard drive status indicator
3. hard drive
Drive status indicator code
Condition
Flashes green twice per second Identifying drive or preparing for removal
Off Drive ready for removal
NOTE: The drive status indicator remains off until all drives
are initialized after the system is turned on. Drives are not
ready for removal during this time.
Flashes green, amber, and then turns off Predicted drive failure
Flashes amber four times per second Drive failed
Flashes green slowly Drive rebuilding
Solid green Drive online
Flashes green for three seconds, amber for three seconds, and
then turns off after six seconds
Rebuild stopped
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
About your system 11