Users Guide

Back to Contents Page
Setting Up the Monitor
Dell™SP2009W Flat Panel Monitor User's Guide
Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Wall Mounting (Optional)
Attaching the Base
To attach the base of the stand:
1. Place the monitor on a flat surface.
2. Turn the screw to tighten the base.
Connecting Your Monitor
To connect your monitor to the computer:
1. Turnoffyourcomputeranddisconnectthepowercable.
2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer.Donotusebothcablesonthesamecomputer. Use both the cables only when they are connected to two different computers with
appropriate video systems.
Connecting the Blue VGA Cable
NOTE: The Base of the stand is detached when the monitor hipped from the factory.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.