Users Guide

26 Storage Solutions Guide
Figure 11. Dell|EMC CLARiiON (Fibre Channel Array)
To provide VMs with access to storage residing on a Dell|EMC CLARiiON
array:
1
Confirm that your planned configuration is supported (see the EMC
Support Matrix
and Virtualization Server Support at
elabnavigator.emc.com) .
NOTE: The following minimum versions are required for support:
Array:
• CX4 Series: FLARE 28
• CX3 Series: FLARE 26
• CX300/500/700: FLARE 26
• AX4-5f: FLARE 23
• AX150: FLARE 20
Host software:
• PowerPath 5.2
2 Establish connectivity between the server and the array, and then provision
LUNs to the server (see the user customized documentation available at
powerlink.emc.com ).