Users Guide

24 Storage Solutions Guide
Figure 10. Dell|EMC CLARiiON (iSCSI Array)
To provide VMs with access to storage residing on a Dell|EMC CLARiiON
array:
1
Confirm that your planned configuration is supported (see the EMC
Support Matrix
and Virtualization Server Support at
elabnavigator.emc.com) .
NOTE: The following minimum versions are required for support:
Array:
• CX4 Series: FLARE 28
• CX3 Series: FLARE 26
• AX4-5i: FLARE 23
• AX150i: FLARE 20
Host software:
• PowerPath 5.2
2 Establish connectivity between the server and the array, and then provision
LUNs to the server (see the user customized documentation available at
powerlink.emc.com ). This will include installation of PowerPath and
Navisphere Agent within the parent partition.