Deployment Guide

Related
Commands
shutdown — Enables or disables the OpenFlow instance.
show openflow — Displays general information about OpenFlow instances.
controller — Specifies the OpenFlow controller configuration that the OpenFlow
instance uses to establish a connection.
show openflow
Display general information about OpenFlow instances.
Syntax
show openflow [of-instance[of-id]]
Parameter
of-instance of-
id
(OPTIONAL)
Enter the keywords of-instance to display information
such as administrative state, interface-type, and operational
state for all OpenFlow instances.
(OPTIONAL) Enter the keywords of-instance followed by
the OF instance ID to display details for the specified OF
instance. The range is from 1 to 8.
Defaults None
Command
Modes
EXEC
Command
History
Version Description
9.7(0.0) Introduced on the S5000, S6000-ON, and Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4820T and MXL.
9.1(0.0) Introduced on the Z9000 and S4810.
Example
Dell#show openflow of-instance 1
Instance : 2
Admin State : Up
OF Version : V1-3
Interface Type : Vlan
DP Id : 00:02:74:86:7a:ff:6f:e4
Forwarding Tbls : acl, mac, route
Flow map :l2, l3
EchoReq interval: 15 seconds
Connect interval: 15 seconds
Number of Flows : 21 (acl:21)
Packets (acl) : 575600
Bytes (acl) : 36838400
Fail mode : secure
Flow misses : copy-to-controller
Controller 1 : TCP, 10.11.54.186/6633, rcv/sndbuf
1000/1000, connected (equal) high-priority
Controller 2 : -
47