Deployment Guide

Version Description
9.3(0.0) Introduced on the S6000.
9.2(0.2) Introduced on the S4820T and MXL.
9.2(0.2) Introduced on the Z9000 and S4810.
Usage
Information
• You cannot configure an IP address as an OF VLAN.
• You cannot add an existing VLAN to an OpenFlow instance.
• You cannot enable STP if you have configured an OF VLAN.
• You cannot assign the default VLAN as an OF VLAN.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
multiple-fwd-table enable
Advertise all forwarding tables (ACL, L2, and L3) to the controller.
Syntax
multiple-fwd-table enable
To disable advertisement of forwarding table, use the no multiple-fwd-table
enablecommand.
Defaults Disabled
Command
Modes
OPENFLOW INSTANCE
Command
History
Version Description
9.7(0.0) Introduced on the S5000, S6000-ON, and Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4820T and MXL.
9.1(0.0) Introduced on the Z9000 and S4810.
Usage
Information
This is a vendor-specific CLI.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
of-instance (Interface)
Add a physical interface or LAG to an OpenFlow instance. After you assign an interface to an OF instance,
you cannot apply L2 or L3 protocols to that instance.
Syntax
of-instance of-id
42