Deployment Guide

Connect interval: 15 seconds
Number of Flows : 21 (acl:21)
Packets (acl) : 575600
Bytes (acl) : 36838400
Fail mode : secure
Flow misses : copy-to-controller
Controller 1 : TCP, 10.11.54.186/6633, rcv/sndbuf 1000/1000, connected
(equal) high-priority
Controller 2 : -
Port List :
Vlan List :
Vl 50
Vlan Mbr list :
Fo 1/16 (209), Fo 1/20 (213), Fo 2/0 (385)
To display information for the second OF instance, use the show running-config openflow of-
instance 2
command:
Dell# show running-config openflow of-instance 2
!
openflow of-instance 2
controller 1 10.11.205.184 tcp
flow-map l2 enable
flow-map l3 enable
interface-type vlan
multiple-fwd-table enable
no shutdown
Dell#show openflow of-instance 2
Instance : 2
Admin State : Up
OF Version : V1-3
Interface Type : Vlan
DP Id : 00:02:74:86:7a:ff:6f:e4
Forwarding Tbls : acl, mac, route
Flow map :l2, l3
EchoReq interval: 15 seconds
Connect interval: 15 seconds
Number of Flows : 21 (acl:21)
Packets (acl) : 575600
Bytes (acl) : 36838400
Fail mode : secure
Flow misses : copy-to-controller
Controller 1 : TCP, 10.11.54.186/6633, rcv/sndbuf 1000/1000, connected
(equal) high-priority
Controller 2 : -
Port List :
Vlan List :
Vl 200
Vlan Mbr list :
Fo 1/16 (209), Fo 1/20 (213), Fo 2/0 (385)
ACL Flows
By default, all flows are treated as ACL flows. No additional configuration is required to set up ACL flows.
You can view per-flow and aggregate statistics for ACL flows using the show openflow of-instance
and show openflow flows of-instance commands.
27