Deployment Guide

Connect interval: 15 seconds
Number of Flows : 10 (acl:10)
Packets (acl) : 8820
Bytes (acl) : 599760
Fail mode : secure
Flow misses : copy-to-controller
Controller 1 : TCP,10.11.54.60/6633, rcv/sndbuf 2000/2000, connected (equal)
Controller 2 : -
Port List :
Dell(conf-of-instance-2)#show config
openflow of-instance 2
controller 1 10.11.54.60 tcp
interface-type vlan
multiple-fwd-table enable
of-version 1.3
dynamic-vlan-learn enable
l2-maclearn-mode enable
no shutdown
Related Commands openflow of-instance — Creates or modifies an OpenFlow instance.
multiple-fwd-table enable
Advertise all forwarding tables (ACL, L2, and L3) to the controller.
Syntax
multiple-fwd-table enable
To disable advertisement of forwarding table, use the no multiple-fwd-table enablecommand.
Defaults Disabled
Command Modes OPENFLOW INSTANCE
Command History
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T-ON and S6010-ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON
9.7(0.0) Introduced on the S5000, S6000-ON, and Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4820T and MXL.
9.1(0.0) Introduced on the S4810.
Usage Information This is a vendor-specific CLI.
Related Commands openflow of-instance — Creates or modifies an OpenFlow instance.
OpenFlow Commands 49