Deployment Guide

Flow map :
EchoReq interval: 15 seconds
Connect interval: 15 seconds
Number of Flows : 10 (acl:10)
Packets (acl) : 8820
Bytes (acl) : 599760
Fail mode : secure
Flow misses : copy-to-controller
Controller 1 : TCP,10.11.54.60/6633, rcv/sndbuf 2000/2000, connected (equal)
Controller 2 : -
Port List :
Dell(conf-of-instance-2)#show config
openflow of-instance 2
controller 1 10.11.54.60 tcp
interface-type vlan
multiple-fwd-table enable
of-version 1.3
dynamic-vlan-learn enable
l2-maclearn-mode enable
no shutdown
Related Commands openflow of-instance — Creates or modifies an OpenFlow instance.
echo-request interval
Configure the echo request interval.
Syntax
echo-request interval interval
To remove the echo-request interval, use the no echo-request interval interval command.
Parameter
interval Enter the time interval in seconds. The range is from 10 to 20.
Defaults The default is 15.
Command Modes OPENFLOW INSTANCE
Command History
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T-ON and S6010-ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON
9.7(0.0) Introduced on the S-Series and Z9500.
Related Commands openflow of-instance — Creates or modifies an OpenFlow instance.
fail-mode secure
Enable flow failover to prevent flow loss if a controller is unavailable.
Syntax
fail-mode secure
44 OpenFlow Commands