Deployment Guide

DP Id : 00:01:00:01:e8:8b:1a:30
Forwarding Tbls : acl
Flow map :
LB assist : disabled
EchoReq interval: 15 seconds
Connect interval: 15 seconds
Number of Flows : 0
Packets (acl) : -
Bytes (acl) : -
Controller 1 : TCP, 10.11.205.184/6633, not-connected
Controller 2 : -
Port List :
Vlan List :
Vlan Mbr list :
Usage
Information
To display general information such as version, capabilities, and supported actions, use the
show openflow command.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
show openflow flows
Display detailed information about OpenFlow instances.
Z9000 S4810 S4820T
Syntax
show openflow flows[of-instance{of-id}][table{acl|lb|mac|route|
vlan}flow-id{flow-id}]
Parameter
of-instance of-id Enter the keywords of-instance followed by the OF instance ID
to display details of all flows installed for the specified OF instance.
The range is from 1 to 8.
table acl | lb |
mac | route | vlan
flow-id flow-id
Enter the keyword table followed by the table type and the
keywords
flow-id followed by the flow ID to display details for the
specified flow:
acl
Display ACL table information.
lb
Display learning bridge table information.
mac
Display MAC table information.
route
Display routing table information.
vlan
Display VLAN table information.
Defaults None
Command Modes EXEC
Command History
Version 9.2(0.0) Introduced on the S4820T and MXL Switch.
Version 9.1(0.0) Introduced on the Z9000 and S4810.
37