Deployment Guide

Defaults Disabled
Command Modes OPENFLOW INSTANCE
Command History
Version 9.2(0.0) Introduced on the S4820T and MXL Switch.
Version 9.1(0.0) Introduced on the Z9000 and S4810.
Usage
Information
This is a vendor-specific CLI.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
of-instance (Interface)
Add a physical interface or LAG to an OpenFlow instance.
Z9000 S4810 S4820T
Syntax
of-instance of-id
Parameter
of-id Enter the OpenFlow instance ID. The range is from 1 to 8.
Command Modes INTERFACE MODE
Command History
Version 9.2(0.0) Introduced on the S4820T and MXL Switch.
Version 9.1(0.0) Introduced on the Z9000 and S4810.
Example In the following example, the ports Te 0/7 and Te 0/31 are associated with of-instance 1:
FTOS(conf)#interface tengigabitethernet 0/7
FTOS(conf-if-te-0/7)#of-instance 1
FTOS(conf-if-te-0/7)#interface tengigabitethernet 0/31
FTOS(conf-if-te-0/31)#of-instance 1
FTOS(conf-if-te-0/31)#
Usage
Information
To enable OpenFlow, associate a port or a VLAN to an OF instance. Associate ports and VLANs
when you create the OF instance and it is in a Shut state (shutdown).
LAGs or port-channel interfaces are supported as of-ports or of-vlan members on OpenFlow.
By default, all ports are available for legacy functionality.
The following features are not supported on physical interfaces associated with an OpenFlow
instance:
• Dot1x
• Ethernet
• GVRP
• IPv4
• IPv6
34