Deployment Guide

error
Enable debugging for error packets.
features-
reply
Enable debugging for features-reply
packets.
features-
request
Enable debugging for features-request
packets.
flow-mod
Enable debugging for flow-mod packets.
flow-removed
Enable debugging for flow-removed
packets.
get-config-
reply
Enable debugging for get-config-reply
packets.
get-config-
request
Enable debugging for get-config-request
packets.
hello
Enable debugging for hello packets.
packet-in
Enable debugging for packet-in packets.
packet-out
Enable debugging for packet-out packets.
port-mod
Enable debugging for port-mod packets.
port-status
Enable debugging for port-status packets.
queue-get-
config-reply
Enable debugging for queue-get-config-
reply packets.
queue-get-
config-
request
Enable debugging for queue-get-config-
request packets.
set-config
Enable debugging for set-config packets.
stats-reply
Enable debugging for stats-reply packets.
stats-
request
Enable debugging for stats-request packets.
vendor
Enable debugging for vendor packets.
of-instance { of-id } Enter the keywords of-instance followed by the OF instance ID.
Defaults None
Command Modes EXEC
Command History
Version 9.2(0.0) Introduced on the S4820T and MXL Switch.
Version 9.1(0.0) Introduced on the Z9000 and S4810.
Usage
Information
If you need to enable debugging for all packets, use the debug openflow packets
packet-type all
command.
Related
Commands
reload conditional nvram-cfg-change — Reloads the chassis to upgrade any configuration
changes to the NVRAM content.
31