User guide

SMART Board Software

• Download the free SMART Board software from this website:

http://www.smarttech.com/support/software/index.asp

• Follow the installation instructions available on the web site above.

• Make sure you have the latest version and update periodically.

• If you experience trouble installing the software, call IT Engineering Services at

974-9110 for technical support.

II.

URNING ON THE

SMART

OARD

Steps for turning on the board in rooms with only a SMART Board:

1. Place your laptop on the shelf of the SMART Board and connect it to the two

cables on the shelf. One cable connects to the USB port, and the other cable

connects to the VGA port of your computer.

2. Turn on your computer.

3. Press the power button on the right on the SMART Board.

4. Press the source select button (indicated with arrow) until laptop is selected as

the source (laptop is selected when the center light is illuminated, as below).

5. If all connections are intact and the laptop button is selected, but there is a blue

"No Signal Source" screen on the board, press Function F8 on a Dell or Function

F3 on a Gateway to get a picture. On other PCs, look for a button that says

“LCD.”

USB VGA

Power Button

Source Select