Users Guide

alias Set alias for a command
batch Batch Mode
boot Tell the system where to access the software image at bootup
clear Clear command
clock Configure the system clock
commit Commit candidate configuration
configure Enter configuration mode
copy Perform a file copy operation
crypto Cryptography commands
...
ping ping -h shows help
ping6 ping6 -h shows help
reload Reboot Networking Operating System
show Show running system information
start Activate transaction based configuration
support-assist-activity Support Assist related activity
system System command
terminal Set terminal settings
traceroute traceroute --help shows help
unlock Unlock candidate configuration
validate Validate candidate configuration
write Copy from current system configuration
ztd Cancel the current ZTD process.
OS10(config)# ?
aaa Configure AAA
alias Set alias for a command
banner Configure banners
bfd Enable bfd globally
class-map Configure class map
clock Configure clock parameters
control-plane Control-plane configuration
crypto Crypto commands
dcbx DCBX commands
default Configure default attributes
dot1x Configure dot1x global information
...
uplink-state-group Create uplink state group
username Create or modify users
userrole Create custom user role
virtual-network Create a Virtual Network
vlt-domain VLT domain configurations
vrrp Configure VRRP global attributes
wred Configure WRED profile
候选配置
在基于事务的配置模式中使用 OS10 配置命令时，更改不会立即生效并存储在候选配置中。只有在使用 commit 命令提交更改
后，配置更改才会变为活动状态。候选配置中的更改将进行验证，并应用于正在运行的配置。
候选配置使您可以避免在 OS10 配置会话期间引入错误。您可以进行更改，然后在将其提交到交换机上的活动、运行的配置之前
对其进行检查。
要检查正在运行的配置与候选配置之间的差异，请使用 show diff candidate-configuration running-
configuration 命令。
例如，在进入事务模式之前，您可以检查是否未输入任何新的配置命令。如果 show 命令未返回输出，则 candidate-
configuration 和 running-configuration 文件是相同的。然后启动事务模式、配置新设置，并查看候选配置与正在运
行的配置之间的差异。确定是否要提交对正在运行的配置的更改。要删除未提交的更改，请使用 discard 命令。
查看候选配置与正在运行的配置之间的差异
OS10# show diff candidate-configuration running-configuration
OS10#
OS10# start transaction
OS10# configure terminal
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# exit
OS10(config)# interface ethernet 1/1/15
52
CLI 基本信息