Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 49. OS9-to-OS10 Security commands (continued)
OS9 security command OS10 security command
Not supported
show secure-boot {status | file-integrity-
status}
Not supported
show secure-boot pki-certificates
Not supported
ip ssh server x509v3-authentication
security-profile profile-name [passwordless]
Not supported
ocsp-check [ocsp-url]
Not supported
ip ssh client cli enable
ssh {hostname} [-l username | -p port-number
| -v {1 | 2}| -c encryption cipher | -m HMAC
algorithm
ssh [vrf {management | vrf-name}] [-b
source_ip_address] [-B source_interface] [-c
encryption_cipher] [-l username] [ -m HMAC_algorithm]
[-p port_number] [-h] destination
sFlow
Enter all OS10 sFlow configuration commands in the global CONFIGURATION mode, except for sflow enable, which is
available in both CONFIGURATION and INTERFACE modes.
The default OS10 sflow polling-interval is 30 seconds. In OS9, the default sflow polling-interval is 20
seconds.
Table 50. OS9-to-OS10 sFlow commands
OS9 sFlow Command OS10 sFlow Command
sflow collector ip-address agent-addr ipv4-
address [port max-datagram-size datagram-
size> vrf management]
sflow collector {
ipv4-address
|
ipv6-address
} agent-
addr {
ipv4-address
|
ipv6-address
} [
collector-port-
number
] [vrf
vrf-name
]
sflow enable
sflow enable [all-interfaces]
sflow {enable|ingress-enable}
sflow enable
sflow max-header-size sampling-size
sflow max-header-size
header-size
sflow polling-interval poll-interval sflow polling-interval poll-interval
sflow sample-rate sampling-rate sflow sample-rate sampling-rate
show sflow show sflow
show sflow interface show sflow interface
Not supported
sflow source-interface {ethernet node/slot/
port[:subport] | loopback loopback-ID |
port-channel port-channel-ID | vlan vlan-ID}
Simple Network Management Protocol
Table 51. OS9-to-OS10 SNMP commands
OS9 SNMP command OS10 SNMP command
snmp-server community community-name {ro |
rw} [ipv6 ipv6-access-list-name | access-
list-name | security-name name]
snmp-server community
community-name
{ro | rw} [acl
aclname
]
show snmp
Not supported
Not supported
show snmp community
50