Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 45. OS9-to-OS10 QoS commands (continued)
OS9 QoS command OS10 QoS command
● trust {diffserv [fallback] | dot1p
[fallback]}
● service-policy input policy-map-name
[layer2]
trust—map dscp {default |
trust-map-name
}
threshold min number max number max-drop-
drop number wred ecn wred {green|yellow}
profile-name wred weight {1-15}
random-detect [color {green|yellow}] minimum-
threshold
min-threshold-value
maximum-threshold
max-
threshold-value
drop-probability
value
[weight
value
]
[ecn]
Not supported
queue number qos-group traffic-class-
numbertype {unicast | multicast}
Not supported
show qos maps type tc-queue
Rapid per-VLAN spanning-tree plus
You can enter the spanning-tree disable command in both the global CONFIGURATION and INTERFACE modes.
Table 46. OS9-to-OS10 RPVST+ commands
OS9 RPVST+ command OS10 RPVST+ command
no disable
spanning-tree mode rapid-pvst
no spanning-treedisable
spanning-tree disable
protocol spanning-tree pvst
Not supported
Not supported
show debug spanning-tree
show spanning-tree pvst
show spanning-tree
show spanning-tree pvst vlan vlan-id brief
show spanning-tree vlan
vlan-id
brief
show spanning-tree pvst
interface [FortyGigE|gigabitethernet|port-
channel|tengigabitethernet]
show spanning-tree interface {ethernet
node/slot/port
[:subport]
| port-channel
number
} [detail]
show spanning-tree vlan vlan-id show spanning-tree vlan vlan-id
Not supported
show spanning-tree virtual-interface
[detail]
Not supported
spanning-tree mac-flush-timer timer-interval
Not supported
spanning-tree vlan vlan-id mac-flush-
threshold threshold-value
spanning-tree pvst edge-port
spanning-tree port type edge
spanning-tree pvst [loopguard|rootguard]
spanning-tree guard {loop|root|none}
spanning-tree pvst vlan vlan-range cost
{1-2000000}
spanning-tree vlan {1-4093} cost {1-2000000}
spanning-tree pvst vlan vlan-range priority
{0-240}
spanning-tree vlan {1-4093} priority {0-240}
spanning-tree rstp edge-port [bpduguard|
shutdown-on-violation]
spanning-tree bpduguard {enable|disable}
spanning-tree vlan {1-4093} max-age {6-40} spanning-tree vlan {1-4093} max-age {6-40}
tc-flush-standard
Not supported
vlan vlan-range bridge-priority {0-61440}
spanning-tree vlan {1-4093} priority {0-61440}
46