Reference Guide

Table 45. OS9-to-OS10 QoS commands (continued)
OS9 QoS command OS10 QoS command
qos-policy-input mac-arp-q cpu-qos
rate-police value peak value
control-plan-cpuqos
service-policy rate-limit-protocols mac-
arp-p
policy-map policy-map-name type control-plane
class class-map-name
police cir value pir value
set qos-group {0-11}
control-plane
service-policy input
policy-map-name
qos-rate-adjust overhead-bytes
qos-rate-adjust [ value-of-adjust ]
rate police committed-rate committed-burst
peak peak-rate peak-burst
class-map type qos class-map-name
policy-map type qos policy-map-name
class class-map-name
police {cir committed-rate [bc committed-burst-
rate
]}
{pir peak-rate [be peak-burst-rate ]}
interface ethernet node/slot/port
service-policy input policy-map-name
rate shape peak-rate peak-burst And
rate-shape peak-rate peak-burst committed
committed-rate committed-burst
class-map type queuing class-map-name
queue {0-7}
policy-map type queuing policy-map-name
class class-map-name
shape {min {mbps | pps} min-value
[
min-burst-size ]} {max {mbps| pps}
max- value [ max-burst-size ]}
interface ethernet node/slot/port
service-policy output policy-map-name
scheduler strict
priority
service-class bandwidth-percentage queue0
{1-100} queue1 {1-100} queue2 {1-100} queue3
{1-100}
class-map type queuing class-map-name
queue {0-7}
policy-map type queuing policy-map-name
class class-map-name
bandwidth percent value
interface ethernet
node/slot/port
service-policy output policy-map-name
Not supported
queue-limit {queue-len value | thresh-mode
[dynamic threshold-alpha-value | static
threshold-value]}
service-class dot1p-mapping dot1p0 {0-3}
dot1p1 {0-3} … dot1p6 {0-3} dot1p7 {0-3}
trust dot1p-map dot1p-map-name
qos-group {0-7} dot1p {0-7}
exit
system qos
trust-map dot1p
trust-policy-map-name
service-class dynamic dot1p
system qos
trust dot1p default
44