Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 40. OS9-to-OS10 Port monitoring commands (continued)
OS9 command OS10 command
no disable
no shutdown
no monitor session all no monitor session all
show monitor session [session-id] show monitor session [session-id]
source {interface|range|any} destination
interface direction {rx|tx|both}
source interface {ethernet
node/slot/port[:subport]
|
port-channel
id-number
|vlan
vlan-id
} {both|rx|tx}
destination {ethernet
node/slot/port[:subport]
|port-
channel
id-number
|vlan
vlan-id
}
source interface interface destination
remote-vlan vlan-id direction {rx|tx|both}
destination remote-vlan
rspan-vlan-id
source remote-vlan vlan-id destination
interface direction {rx|tx|both}
Not supported
Encapsulated Remote Port Monitoring
Table 41. OS9-to-OS10 Encapsulated remote port monitoring commands
OS9 command OS10 command
description text description text
disable
shut
erpm source-ip source-ip-address dest-ip
destination-ip-address [gre-protocol value]
source-ip
source-ip-address
dest-ip
destination-ip-
address
[gre-protocol
value
]
flow-based enable flow-based enable
monitor session session-ID [type { rpm |
erpm [set ip dscp dscp_value | set ip ttl
ttl_value]}] [drop]
monitor session
session-id
type [local | rpm-source |
erpm-source]
set ip dscp dscp-value
ip dscp
dscp-value
set ip ttl ttl-value
ip ttl
ttl-value
source {any | interface-type | vlan vlan-
id | port-channel port-channel-number |
[range {interface-type | vlan vlan-id| port-
channel port-channel-number}]} destination
{interface-type | port-channel port-channel-
number} direction {rx | tx | both}
source interface {ethernet node/slot/port[:subport] |
port-channel id-number | vlan vlan-id} {both | rx | tx}
PVLAN
Table 42. OS9-to-OS10 PVLAN commands
OS9 PVLAN command OS10 PVLAN command
ip local-proxy-arp ip local-proxy-arp
private-vlan mapping secondary-vlan vlan-
list
private-vlan mapping secondary-vlans
vlan-list
private-vlan mode {community | isolated |
primary}
private-vlan mode {community | isolated |
primary}
switchport mode private-vlan promiscuous
switchport mode private-vlan host
private-vlan mode {promiscuous | secondary-port}
Not supported
show interface private-vlan [interface-name]
40