Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 38. OS9-to-OS10 PIM commands (continued)
OS9 PIM command OS10 PIM command
ip pim [vrf vrf-name] ssm-range {access-
list-name}
ip pim [vrf vrf-name] ssm-range {access-
list-name}
show ip pim [vrf vrf-name] bsr-router show ip pim [vrf vrf-name] bsr-router
show ip pim [vrf vrf-name] interface show ip pim [vrf vrf-name] interface
Not supported
show ip pim [vrf vrf-name] mcache [group-
address [source-address]]
show ip pim [vrf vrf-name] neighbor show ip pim [vrf vrf-name] neighbor
Not supported
show ip pim [vrf vrf-name] register-filter
group-address source-address
show ip pim [vrf vrf-name] rp [mapping |
group-address]
show ip pim [vrf vrf-name] rp [mapping |
group-address]
show ip pim [vrf vrf-name] ssm-range show ip pim [vrf vrf-name] ssm-range
show ip pim [vrf vrf-name] summary show ip pim [vrf vrf-name] summary
show ip pim [vrf vrf-name] tib [group-
address [source-address]]
show ip pim [vrf vrf-name] tib [group-
address [source-address]]
show ip rpf [vrf vrf-name] [source-address]
[summary]
show ip rpf [vrf
vrf-name
] [summary]
Policy-based routing
Table 39. OS9-to-OS10 PBR commands
OS9 PBR command OS10 PBR command
ip redirect-group [redirect-list-name]
{ip|ipv6} policy route-map [
map-name
]
{seq sequence-number} redirect {ip-address|
tunnel tunnel-id} [track obj-id] {protocol-
type} {source mask |any|host ip-address}
{destination mask|any|host ip-address} [bit]
[operators]
match {ip|ipv6} address [
name
] set {ip|ipv6} next-hop
address
set {ip|ipv6} next-hop
address
track
track-id
show cam pbr [interface interface|linecard
slot-number port-set number] [summary]
Not supported
show ip redirect-list [list-name]
show [ip|ipv6] policy [
name
]
Not supported
clear route-map map-name pbr-statistics
Not supported
route-map map-name pbr-statistics
Not supported
show route-map [map-name] pbr-statistics
Port monitoring
Table 40. OS9-to-OS10 Port monitoring commands
OS9 command OS10 command
flow-based enable flow-based enable
mode remote-port-mirroring
remote-span
monitor session session-id [type {rpm |
erpm}
monitor session
session-id
[type {local | rpm-source |
erpm-source}]
39