Reference Guide

Table 37. OS9-to-OS10 OSPFv3 commands (continued)
OS9 OSPFv3 command OS10 OSPFv3 command
area area-id stub [no-summary] area area-id stub [no-summary]
auto-cost [reference-bandwidth ref-bw] auto-cost [reference-bandwidth ref-bw]
bfd all-neighbors interval milliseconds bfd all-neighbors interval milliseconds
clear ipv6 ospf [vrf vrf-name] process
clear ipv6 ospf { instance-number } [vrf vrf-name ]
process
Not supported clear ipv6 ospf { instance-number } [vrf vrf-name ]
statistics
default-information originate [always]
[metric metric] [metric-type {1|2}] [route-
map map-name]
default-information originate [always]
graceful-restart {grace-period seconds|mode
{planned-only|unplanned-only}
Not supported
ipv6 ospf process-id area area-id ipv6 ospf process-id area area-id
ipv6 ospf authentication ipsec spi number
{MD5|SHA1} [key-encryption-type] key-string
ipv6 ospf authentication {null | ipsec spi number {MD5 |
SHA1} key }
ipv6 ospf bfd all-neighbors [disable |
interval milliseconds]
ipv6 ospf bfd all-neighbors [disable |
interval milliseconds]
ipv6 ospf cost value ipv6 ospf cost value
ipv6 ospf dead-interval seconds ipv6 ospf dead-interval seconds
ipv6 ospf encryption {null|ipsec spi number
esp encryption-algorithm [key-encryption-
type] key-string {MD5|SHA1} [key-encryption-
type] key-string}
ipv6 ospf encryption {ipsec spi number esp encryption-
type key authentication-type key | null}
ipv6 ospf graceful-restart helper-reject
Not supported
ipv6 ospf hello-intervalseconds ipv6 ospf hello-intervalseconds
Not supported
ipv6 ospf mtu-ignore
ipv6 ospf network {broadcast|point-to-point} ipv6 ospf network {broadcast|point-to-point}
ipv6 ospf priority number ipv6 ospf priority number
ipv6 route bfd [vrf vrf-name] [prefix-list
prefix-list-name] [interval interval min_rx
min_rx multiplier value role {active |
passive}]
ipv6 route bfd [interval millisec min_rx min_rx multiplier
number role {active | passive}]
ipv6 router ospf process-id [vrf vrf-name]
router ospfv3 instance-number [vrf vrf-name ]
log-adjacency-changes log-adjacency-changes
maximum-paths number maximum-paths number
passive-interface interface}
ipv6 ospf passive
redistribute {bgp as-number|connected|ospf
process-id} [metric metric metric-type {1|2}
route-map map-name tag value]|imported-ospf
[route-map map-name]}
redistribute {bgp as-number |conencted|static} [route-
map map-name ]
router-id ip-address router-id ip-address
show config
show configuration [candidate]
show ipv6 ospf instance-number show ipv6 ospf instance-number
37