Reference Guide

Table 35. OpenFlow commands (continued)
OS9 OpenFlow command OS10 OpenFlow command
debug openflow packets packet-type {packet-
type} of-instance {of-id}
Not supported
echo-request interval interval
probe-interval
interval
fail-mode secure
Not supported
flow-map {l2 | l3} enable
Not supported
flow-misses drop
Not supported
interface-type {any | port | vlan}
Not supported
interface vlan vlan-id of-instance of-id
Not supported
multiple-fwd-table enable
Not supported
of-instance of-id
Not supported
openflow of-instance of-id
Not supported
of-version {1.0 | 1.3}
protocol-version
version
openflow vlan vlan-id
Not supported
show openflow [of-instance[of-id]]
show openflow
show openflow flows[of-instance{of-id}]
[table{acl | mac | route | vlan}flow-
id{flow-id}]
show openflow switch
logical-switch-name
flows
shutdown shutdown
src-suppression
Not supported
Not supported dpid-mac-address
MAC-address
Not supported in-band-mgmt interface ethernet
node
/
slot
/
port
[:
subport
]
Not supported mode openflow-only
Not supported openflow
Not supported rate-limit packet_in
controller-packet-rate
[burst
maximum-packets-to-controller
]
Not supported show openflow switch
logical-switch-name
ports
Not supported show openflow switch
Not supported show openflow switch
logical-switch-name
controllers
Not supported switch
logical-switch-name
Open shortest path first V2
Table 36. OS9-to-OS10 OSPFv2 commands
OS9 OSPFv2 command OS10 OSPFv2 command
area area-id default-cost cost area area-id default-cost cost
area area-id nssa [default-information-
originate] [no-redistribution] [no-summary]
area area-id nssa [default-information-
originate] [no-redistribution] [no-summary]
area area-id range ip-address/mask [no-
advertise]
area area-id range ip-address/mask [no-
advertise]
34