Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 31. OS9-to-OS10 MSTP commands (continued)
OS9 MSTP command OS10 MSTP command
no spanning-tree disable spanning-tree disable
protocol spanning-tree
Not supported
Not supported spanning-tree mac-flush-timer
timer-interval
show spanning-tree msti show spanning-tree msti
Not supported spanning-tree mst
instance-number
mac-flush-
threshold
threshold-value
show spanning-tree msti {instance-number
[brief|interface interface]}
show spanning-tree brief show spanning-tree msti
[
instance-number
[brief|interface
interface
]]
show spanning-tree msti instance-number
interface [FortyGigE|gigabitethernet|port-
channel|tengigabitethernet]
show spanning-tree interface {ethernet
node/slot/port
[:subport]
| port-channel
number
} [detail]
spanning-tree msti {0-63} cost {1-2000000} spanning-tree msti {0-63} cost {1-2000000}
spanning-tree msti {0-63} priority {0-240} spanning-tree msti {0-63} priority {0-240}
spanning-tree mstp edge-port
spanning-tree port type edge
spanning-tree mstp edge-port [bpduguard|
shutdown-on-violation]
spanning-tree bpduguard {enable|disable}
spanning-tree mstp {loopguard|rootguard}
spanning-tree guard {loop|root|none}
spanning-tree {rstp | mstp | pvst | MSTi}
edge-port bpduguard [shutdown-on-violation]
errdisable detect cause bpduguard
errdisable recovery cause {bpduguard | fefd
| maclearnlimit | arp-inspection}
errdisable recovery cause bpduguard
errdisable recovery interval seconds
errdisable recovery interval
interval-value
Not supported show errdisable [detect | recovery]
tc-flush-standard
Not supported
Not supported show spanning-tree active
Not supported show spanning-tree guard interface {ethernet
node/
slot/port [:subport]
| port-channel
number
}
Not supported spanning-tree bpdufilter {enable|disable}
Not supported spanning-tree link-type {auto|point-to-point|shared}
Not supported spanning-tree mst force-version {stp|rstp}
Not supported spanning-tree mst
instance-number
root {primary|
secondary}
Not supported spanning-tree rapid-pvst default-behavior
Not supported show spanning-tree compatibility-mode
Neighbor discovery protocol
Table 32. OS9-to-OS10 NDP commands
OS9 NDP command OS10 NDP command
ipv6 nd {dad|disable-reachable-
timer|dns-server|hop-limit|managed-config-
flag|max-ra-interval|mtu|other-config-flag|
ipv6 nd {hop-limit|managed-
config-flag|max-ra-interval|min-ra-interval|mtu|other-
31