Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 21. OS9-to-OS10 Interfaces commands (continued)
OS9 interfaces command OS10 interfaces command
show interfaces interface link-status
Not supported
show interfaces stack-unit unit-id
Not supported
show interfaces status show interfaces status
show interfaces switchport [interface-type|
stack-unit unit-id|backup]
Not supported
show interfaces transceiver
show interface phy-eth [
node/slot/port
] [transceiver]
show interfaces vlan [vlan-id|vlan-name]
[description]
show interface vlan {1-4093}
Not supported show inventory media wattage
show range
Not supported
show system stack-unit unit-id fanout
configured
show system node-id 1 fanout-configured
[no] shutdown [no] shutdown
speed {10|100|1000|10000|auto} speed {10|100|1000|10000|auto}
stack-unit unit-number port port-number
portmode {dual speed 50G|quad speed {25G|
10G}| single speed 40G} [no-confirm]
interface breakout
interface
map {40g-1x|10g-4x}
Not supported stats-monitor stat-type ethernet polling-interval
interval-value
switchport [backup interface {interface|
port-channel number} | mode private-vlan
{host|promisucous|trunk}]
switchport {access vlan
vlan-id
|mode {access|trunk
allowed vlan
vlan-id
}
wavelength wavelength
Not supported
Not supported
default mtu <mtu-value>
Not supported
show default mtu
Internet small computer system interface
Table 22. OS9-to-OS10 iSCSI commands
OS9 iSCSI command OS10 iSCSI command
advertise dcbxp-appln-tlv iscsi
lldp tlv-select dcbxp-appln iscsi
iscsi aging [time minutes] iscsi aging [time minutes]
iscsi enable iscsi enable
iscsi enable
iscsi session-monitoring enable
iscsi priority-bits priority-bitmap iscsi priority-bits priority-bitmap
iscsi profile-compellant
iscsi profile-storage
device-name
iscsi target port tcp-port1 [tcp-port2, ...,
tcp-port16] [ip-address ip-address]
iscsi target port tcp-port1 [tcp-port2, ...,
tcp-port16] [ip-address ip-address]
show interface [ethernet node/slot/
port[:subport]] pfc detail
show lldp dcbx interface [ethernet
node/slot/
port[:subport
]] pfc detail
show iscsi show iscsi
show iscsi session [detailed] show iscsi session [detailed]
25