Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 9. OS9-to-OS10 BGP commands (continued)
OS9 BGP command OS10 BGP command
Not supported
address-family [ipv4-address|ipv6-address]
unicast
Not supported
connection-retry-timer seconds
Not supported
neighbor {ipv4-address|ipv6-address |
interface interface-type}
Not supported
ipv6 bgp unnumbered {ebgp-template | ibgp-
template}
Common commands
Table 10. OS9-to-OS10 Common commands
OS9 command OS10 command
Not supported
alias alias-name alias-value
clear command-history clear command-history
ping [hostname | ip-address | ipv6-address
[count | datagram-size | df-bit | pattern
| source | sweep-internal | sweep-max-size
| sweep-min-size | timeout | tos | validate-
reply]] | ethernet | [vrf vrf-name]
ping [vrf {management |
vrf-name
}] [-
aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I
interface] [-m mark] [-M pmtudisc_option] [-l preload]
[-p pattern] [-Q tos] [-s packetsize] [-S sndbuf] [-t
ttl] [-T timestamp_option] [-w deadline] [-W timeout]
[hop1 ...] destination
ping [hostname | ip-address | ipv6-address
[count | datagram-size | df-bit | pattern
| source | sweep-internal | sweep-max-size
| sweep-min-size | timeout | tos | validate-
reply]] | ethernet | [vrf vrf-name]
ping6 [vrf {management |
vrf-name
}] [-
aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I
interface] [-l preload] [-m mark] [-M pmtudisc_option]
[-N nodeinfo_option] [-p pattern] [-Q tclass] [-s
packetsize] [-S sndbuf] [-t ttl] [-T timestamp_option]
[-w deadline] [-W timeout] destination
show debug
show debug {all | dot1x | fefd | lacp | lldp | spanning-
tree | vlt}
undebug all undebug all
traceroute {host | vrf instance | ip-address
| ipv6-address}
traceroute [vrf {management |
vrf-name
}]
host
[-46dFITnreAUDV] [-f first_ttl] [-g gate,...] [-i device]
[-m max_ttl] [-N squeries] [-p port] [-t tos] [-l
flow_label] [-w waittime] [-q nqueries] [-s src_addr] [-z
sendwait] [--fwmark=num] host [packetlen]
Data center bridging eXchange
Table 11. OS9-to-OS10 DCBX commands
OS9 DCBX command OS10 DCBX command
advertise dcbx-tlv {ets-conf|ets-reco|pfc}
dcbx tlv-select {ets-conf|ets-reco|pfc}
dcb enable
dcbx enable
dcbx version {auto|cee|cin|ieee-v2.5}
dcbx version {auto|cee|ieee-v2.5}
debug dcbx {all | auto-detect-timer |
config-exchng | fail | mgmt | resource | sem
| tlv}
debug dcbx {all | events | tlv} [interface ethernet
node/
slot/port
]
show dcb
show debug dcbx
15