Reference Guide
Table Of Contents
- Dell EMC SmartFabric OS10: OS9-to-OS10 Command Mapping
- _
- Migrating from OS9 to OS10 command-line interface
- 802.1x authentication
- Access control lists
- Address resolution protocol
- Alarm
- Authentication, Authorization, and Accounting
- Border gateway protocol
- Common commands
- Data center bridging eXchange
- DHCP relay
- DHCP server
- DHCP snooping
- Domain name server
- Equal cost multi-path
- FEFD
- Fibre channel
- File management
- Internet Group Management Protocol
- Interfaces
- Internet small computer system interface
- IP routing
- IPv4 addressing
- IPv6 addressing
- Link aggregation control protocol
- Link layer discovery protocol
- LLDP-MED
- Multicast
- MLD snooping
- Multiple spanning-tree protocol
- Neighbor discovery protocol
- Network time protocol
- Object tracking manager
- OpenFlow
- Open shortest path first V2
- Open shortest path first V3
- Protocol Independent Multicast
- Policy-based routing
- Port monitoring
- PVLAN
- Port Security
- Precision Time Protocol
- Quality of service
- Rapid per-VLAN spanning-tree plus
- Rapid spanning-tree protocol
- RestConf configuration
- Security
- sFlow
- Simple Network Management Protocol
- SmartFabric Services
- SmartFabric Director
- Spanning-Tree Protocol
- SupportAssist
- SyncE
- System management
- Support bundle
- Telemetry
- Uplink Failure Detection
- Virtual link trunking
- Virtual router redundancy protocol
- Virtual routing and forwarding
- VLAN
- VXLAN
- Weighted Random Early Detection and Explicit Congestion Notification
- X.509v3
- Zero touch deployment
- Migrating from OS9 to OS10 command-line interface
Table 9. OS9-to-OS10 BGP commands (continued)
OS9 BGP command OS10 BGP command
neighbor {peer-group-name|ipv4-address|ipv6-
address} default-originate {route-map map-
name}
default-originate {route-map
map-name
}
neighbor {peer-group-name|ipv4-address|ipv6-
address} description
Not supported
neighbor {peer-group-name|ipv4-address|ipv6-
address} distribute-list prefix-list-name
distribute-list
prefix-list-name
neighbor {peer-group-name|ipv4-address|ipv6-
address} dmzlink-bw
Not supported
neighbor {peer-group-name|ipv4-address|ipv6-
address} ebgp-multihop ttl-value
ebgp-multihop
ttl-value
neighbor {peer-group-name|ipv4-address|ipv6-
address} fall-over
fall-over
neighbor {peer-group-name|ipv4-address|ipv6-
address} filter-list list-name
Not supported
neighbor {peer-group-name|ipv4-address|ipv6-
address} local-as as-number
local-as
as-number
neighbor {peer-group-name|ipv4-address|ipv6-
address} maximum-prefix maximum-number
[threshold] [warning-only]
maximum-prefix
maximum-number
[
threshold
]
[warning-only]
neighbor {peer-group-name|ipv4-address|ipv6-
address} next-hop-self [all]
next-hop-self
neighbor {peer-group-name|ipv4-address|ipv6-
address} password string
password
string
neighbor peer-group-name peer-group
template
template-name
neighbor {peer-group-name|ipv4-address|ipv6-
address} peer-group peer-group-name
inherit template
template-name
neighbor peer-group-name peer-group passive
limit sessions
listen {
ipv4-address/mask
|
ipv6-address/mask
} limit
number
neighbor {peer-group-name|ipv4-address|ipv6-
address} remote-as as-number
remote-as
as-number
neighbor {peer-group-name|ipv4-address|ipv6-
address} route-reflector-client
route-reflector-client
neighbor {peer-group-name|ipv4-address|ipv6-
address} route-map map-name
route-map
map-name
neighbor {peer-group-name|ipv4-address|ipv6-
address} send-community [extended|standard]
send-community [extended|standard]
neighbor {peer-group-name|ipv4-address|ipv6-
address} sender-side-loop-detection
sender-side-loop-detection
neighbor {peer-group-name|ipv4-address|ipv6-
address} shutdown
shutdown
neighbor {peer-group-name|ipv4-address|ipv6-
address} soft-reconfiguration inbound
soft-reconfiguration inbound
neighbor {peer-group-name|ipv4-address|ipv6-
address} timers keepalive holdtime
timers
keepalive holdtime
13