Deployment Guide
Table Of Contents
- VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.2
- VXLAN
- VXLAN concepts
- VXLAN as NVO solution
- Configure VXLAN
- L3 VXLAN route scaling
- DHCP relay on VTEPs
- View VXLAN configuration
- VXLAN MAC addresses
- Example: VXLAN with static VTEP
- Controller-provisioned VXLAN
- BGP EVPN for VXLAN
- BGP EVPN compared to static VXLAN
- VXLAN BGP EVPN operation
- Configure BGP EVPN for VXLAN
- BGP EVPN with VLT
- VXLAN BGP EVPN routing
- Example: VXLAN with BGP EVPN
- Example: VXLAN BGP EVPN — Multiple AS topology
- Example: VXLAN BGP EVPN — Centralized L3 gateway
- Example: VXLAN BGP EVPN — Border leaf gateway with asymmetric IRB
- Example: VXLAN BGP EVPN—Symmetric IRB
- Example - VXLAN BGP EVPN symmetric IRB with unnumbered BGP peering
- Example - Route leaking across VRFs in a VXLAN BGP EVPN symmetric IRB topology
- Example: Migrating from Asymmetric IRB to Symmetric IRB
- VXLAN MAC commands
- clear mac address-table dynamic nve remote-vtep
- clear mac address-table dynamic virtual-network
- show mac address-table count extended
- show mac address-table count nve
- show mac address-table count virtual-network
- show mac address-table extended
- show mac address-table nve
- show mac address-table virtual-network
- VXLAN BGP commands
- VXLAN commands
- hardware overlay-routing-profile
- interface virtual-network
- ip virtual-router address
- ip virtual-router mac-address
- member-interface
- nve
- remote-vtep
- show hardware overlay-routing-profile mode
- show interface virtual-network
- show nve remote-vtep
- show nve remote-vtep counters
- show nve vxlan-vni
- show virtual-network
- show virtual-network counters
- show virtual-network interface counters
- show virtual-network interface
- show virtual-network vlan
- show vlan (virtual network)
- source-interface loopback
- virtual-network
- virtual-network untagged-vlan
- vxlan-vni
- VXLAN EVPN commands
- Support resources
- Index
show evpn mac
Displays BGP EVPN routes for host MAC addresses.
Syntax
show evpn mac {count | mac-address nn.nn.nn.nn | evi id [mac-address
nn.nn.nn.nn | count | next-hop ip-address count]}
Parameters
● count — Displays the total number of local and remote host MAC addresses in EVPN instances.
● mac-address nn.nn.nn.nn — Displays the BGP EVPN routes for a specific 48-bit host MAC
address.
● evi id — Displays the host MAC addresses and next hops in a specified EVPN instance, from 1 to
65535. To filter the output, display information on the host MAC address count for an EVPN ID or for
a next-hop IP address, and BGP routes for a specified MAC address.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the BGP routes for host MAC addresses in EVPN instances. The type 2
routes received from the remote VTEP is displayed only if there is a corresponding EVI configured locally.
Examples
OS10# show evpn mac
Type -(lcl): Local (rmt): remote
EVI Mac-Address Type Seq-No Interface/Next-Hop
50 00:00:00:aa:aa:aa rmt 0 55.1.1.3
OS10# show evpn mac count
Total MAC Entries :
Local MAC Address Count : 2
Remote MAC Address Count : 5
OS10# show evpn mac evi 811 count
EVI 811 MAC Entries :
Local MAC Address Count : 1
Remote MAC Address Count : 2
OS10# show evpn mac evi 811 next-hop 80.80.1.8 count
EVI 811 next-hop 80.80.1.8 MAC Entries :
Remote MAC Address Count : 2
Supported
releases
10.4.2.0 or later
show evpn mac-ip
Displays the BGP EVPN Type 2 routes used for host MAC-IP address binding.
Syntax
show evpn mac-ip [count | evi evi [mac-address mac-address] | mac-address
mac-address | next-hop ip-address]
Parameters
● count — Displays the total number of MAC addresses in EVPN MAC-IP address binding.
● evi evi — Enter an EVPN instance ID, from 1 to 65535.
● host ip-address — Enter the IP address of a host that communicates through EVPN routes.
● mac-address mac-address — Enter the MAC address of a host that communicates through
EVPN routes in the format nn:nn:nn:nn:nn.
● next-hop ip-address — Enter the IP address of a next-hop switch.
VXLAN 183