Deployment Guide

balanced-overlay-routing 32768 32768 8192 8192
scaled-overlay-routing 53248 12288 12288 4096
show hardware overlay-routing-profile mode
Overlay Underlay Overlay Underlay
Setting Mode Next-hop Next-hop L3 RIF L3 RIF
Entries Entries Entries Entries
Current default-overlay-routing 8192 57344 2048 14336
Next-boot default-overlay-routing 8192 57344 2048 14336
Supported
releases
10.4.3.0 or later
show interface virtual-network
Displays the configuration of virtual-network router interfaces and packet statistics.
Syntax
show interface virtual-network [vn-id]
Parameters
vn-id
Enter a virtual-network ID, from 1 to 65535.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the virtual-network IP address used for routing traffic in a virtual network.
Traffic counters also display.
Example
show interface virtual-network 102
Virtual-network 102 is up, line protocol is up
Address is 14:18:77:25:6f:84, Current address is 14:18:77:25:6f:84
Interface index is 66
Internet address is 12.12.12.2/24
Mode of IPv4 Address Assignment: MANUAL
Interface IPv6 oper status: Enabled
Link local IPv6 address: fe80::1618:77ff:fe25:6eb9/64
MTU 1532 bytes, IP MTU 1500 bytes
ARP type: ARPA, ARP Timeout: 60
Last clearing of "show interface" counters: 10:24:21
Queuing strategy: fifo
Input statistics:
89 packets, 10056 octets
Output statistics:
207 packets, 7376 octets
Time since last interface status change: 10:23:21
Supported
releases
10.4.3.0 or later
show nve remote-vtep
Displays information about remote VXLAN tunnel endpoints.
Syntax
show nve remote-vtep [ip-address | summary | counters]
Parameters
ip-address
Display detailed information about a specified remote VTEP.
summary
Display summary information about remote VTEPs.
counters
Display statistics on remote VTEP traffic.
Default Not configured
VXLAN 171