API Guide
Table Of Contents
- VXLAN and BGP EVPN Configuration Guide for Dell EMC SmartFabric OS10 Release 10.5.1
- VXLAN
- VXLAN concepts
- VXLAN as NVO solution
- Configure VXLAN
- L3 VXLAN route scaling
- DHCP relay on VTEPs
- View VXLAN configuration
- VXLAN MAC addresses
- VXLAN commands
- hardware overlay-routing-profile
- interface virtual-network
- ip virtual-router address
- ip virtual-router mac-address
- member-interface
- nve
- remote-vtep
- show hardware overlay-routing-profile mode
- show interface virtual-network
- show nve remote-vtep
- show nve remote-vtep counters
- show nve vxlan-vni
- show virtual-network
- show virtual-network counters
- show virtual-network interface counters
- show virtual-network interface
- show virtual-network vlan
- show vlan (virtual network)
- source-interface loopback
- virtual-network
- virtual-network untagged-vlan
- vxlan-vni
- VXLAN MAC commands
- clear mac address-table dynamic nve remote-vtep
- clear mac address-table dynamic virtual-network
- show mac address-table count extended
- show mac address-table count nve
- show mac address-table count virtual-network
- show mac address-table extended
- show mac address-table nve
- show mac address-table virtual-network
- Example: VXLAN with static VTEP
- BGP EVPN for VXLAN
- BGP EVPN compared to static VXLAN
- VXLAN BGP EVPN operation
- Configure BGP EVPN for VXLAN
- VXLAN BGP EVPN routing
- BGP EVPN with VLT
- VXLAN BGP commands
- VXLAN EVPN commands
- Example: VXLAN with BGP EVPN
- Example: VXLAN BGP EVPN — Multiple AS topology
- Example: VXLAN BGP EVPN — Centralized L3 gateway
- Example: VXLAN BGP EVPN — Border leaf gateway with asymmetric IRB
- Example: VXLAN BGP EVPN—Symmetric IRB
- Example - VXLAN BGP EVPN symmetric IRB with unnumbered BGP peering
- Example: Migrating from Asymmetric IRB to Symmetric IRB
- Controller-provisioned VXLAN
- Support resources
- Index
OS10(config-evpn-evi)# vni 10000
OS10(config-evpn-evi)# rd 111.111.111.111:65535
OS10(config)# evpn
OS10(config-evpn)# vrf vrf-blue
OS10(config-evpn-vrf-vrf-blue)# rd 111.111.111.111:65000
Supported
releases
10.4.2.0 or later
redistribute l2vpn evpn
Redistributes L2VPN EVPN routes into BGP and OSPF IPv4/IPv6 routes.
Syntax
redistribute l2vpn evpn [route-map map name]
Parameters
● route-map map-name — (Optional) Filter the L2VPN EVPN routes that are redistributed in BGP
and OSPF.
Default None
Command Mode ROUTER-BGPv4-AF, ROUTER-BGPv6-AF, ROUTER-OSPF, or ROUTER-OSPFv6
Usage
Information
Use the redistribute l2vpn evpn command to redistribute the L2VPN EVPN routes learned in
non-default tenant VRFs for BGP and or OSPF IPv4/IPv6 routing.
Example
OS10(config)# router bgp 101
OS10(conf-router-bgp-101)# vrf blue
OS10(conf-router-bgp-101-vrf)# address-family ipv4 unicast
OS10(configure-router-bgpv4-af)# redistribute l2vpn evpn
OS10(config)# router ospf 1 vrf GREEN
OS10(config-router-ospf-1)# redistribute l2vpn evpn
OS10(config)# router ospfv3 2 vrf GREEN
OS10(config-router-ospfv3-2)# redistribute l2vpn evpn
Supported
Releases
10.5.1 or later
route-target
Configures the Route Target (RT) values that EVPN routes use.
Syntax
route-target {auto | value {import | export | both} [asn4]}
Parameters
value {import
| export |
both}
Configure an RT import or export value, or both values in the format 2-octet-
ASN:4-octet-number or 4-octet-ASN:2-octet-number.
● The 2-octet ASN or number is 1 to 65535.
● The 4-octet ASN or number is 1 to 4294967295.
auto
Configure the RT import and export values to automatically generate.
asn4
(Optional) Advertises a 4-byte AS number in RT values.
Default Not configured
Command mode EVPN-EVI and EVPN-VRF
Usage
information
A RT determines how EVPN routes distribute among EVPN instances. Configure each RT with an import
and export value. When the EVPN routes advertise, the RT export value configured for export attaches
to each route. The receiving VTEP compares a route export value with the local RT import value. If the
values match, the routes download and install on the VTEP.
68 BGP EVPN for VXLAN