API Guide

show nve remote-vtep
Displays information about remote VXLAN tunnel endpoints.
Syntax
show nve remote-vtep [ip-address | summary | counters]
Parameters
ip-address
Display detailed information about a specified remote VTEP.
summary
Display summary information about remote VTEPs.
counters
Display statistics on remote VTEP traffic.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the IP address, operational state, and configured VXLANs for each remote
VTEP. The remote MAC learning and unknown unicast drop settings used for each VXLAN ID (VNI) also
display.
Example
OS10# show nve remote-vtep summary
Remote-VTEP State
-----------------------
2.2.2.2 up
OS10# show nve remote-vtep
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD -
Unknown-Unicast-Drop
IP Address: 2.2.2.2, State: up, Encap: VxLAN
VNI list: 10000(DP), 200(DP), 300(DP)
Supported
releases
10.4.2.0 or later
show nve remote-vtep counters
Displays VXLAN packet statistics for a remote VTEP.
Syntax
show nve remote-vtep [ip-address] counters
Parameters
● ip-address — Enter IP address of a remote VTEP.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display input and output statistics for VXLAN traffic on a remote VTEP. A VTEP
is identified by its IP address. Use the clear nve remote-vtep [ip-address] counters
command to clear VXLAN packet statistics.
Example
OS10# show nve remote-vtep counters
Peer Input (Packets/Bytes) Output (Packets/Bytes)
10.10.10.10 857/8570 257/23709
20.20.20.20 457/3570 277/13709
Supported
releases
10.4.2.0 or later
show nve vxlan-vni
Displays information about the VXLAN virtual networks on the switch.
Syntax
show nve vxlan-vni
VXLAN 25