Users Guide

to Dell and/or to Dell's affiliates, subcontractors or business partners. When making such
transfers, Dell shall ensure appropriate protection is in place to safeguard the Collected Data
being transferred in connection with SupportAssist. If you are downloading SupportAssist on
behalf of a company or other legal entity, you are further certifying to Dell that you have
appropriate authority to provide this consent on behalf of that entity. If you do not consent
to the collection, transmission and/or use of the Collected Data, you may not download, install
or otherwise use SupportAssist.
(END)
SupportAssist commands
activity
Enables SupportAssist activities to run on an associated trigger or schedule time.
Syntax
activity [coredump-transfer | event-notification | full-transfer} enable
Parameters
• coredump-transfer — Enables transfer of core dump les.
• event-notification — Enables transfer of event notication les.
• full-transfer — Enables transfer of logs and technical support information.
Default Enabled
Command Mode SUPPORT-ASSIST
Usage Information Use the no version of this command to remove the conguration.
Example (Event)
OS10(conf-support-assist)# activity event-notification enable
Example (Full)
OS10(conf-support-assist)# activity full-transfer enable
Example (Turn O)
OS10(conf-support-assist)# no activity coredump-transfer enable
Supported Releases 10.2.0E or later
contact-company
Congures the company contact information.
Syntax
contact-company name
Parameters name — Enter the contact company name (up to 140 characters).
Default Not congured
Command Mode SUPPORT-ASSIST
Usage Information You can enter only one contact-company, and use double quotes to enclose additional contact information. The no
version of this command removes the conguration.
Example
OS10(conf-support-assist)# contact-company name Eureka
OS10(conf-support-assist-Eureka)#
Supported Releases 10.2.0E or later
Troubleshoot OS10 563