Users Guide

show inventory
Displays system inventory information.
Syntax
show inventory
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show inventory
Product : S5148F-ON
Description : S5148F-ON 48x25GbE, 6x100GbE QSFP28 Interface Module
Software version : 10.3.2E(X)
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------
* 1 S5148F-ON 0X4XRX X01 CN-0X4XRX-CES00-798-0029 9CLSG02 203 532 341 78
1 S5148F-ON-PWR-2-AC 02RPHX A00 CN-02RPHX-DED00-788-02YZ
1 S5148F-ON-FANTRAY-1 03CH15 A00 CN-03CH15-CES00-78C-0076
1 S5148F-ON-FANTRAY-2 03CH15 A00 CN-03CH15-CES00-78C-0073
1 S5148F-ON-FANTRAY-3 03CH15 A00 CN-03CH15-CES00-78C-0095
1 S5148F-ON-FANTRAY-4 03CH15 A00 CN-03CH15-CES00-78C-0075
Supported Releases 10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the management port.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
• all — (Optional) Display the IPv4 routes that the management interface uses.
• connected — (Optional) Display only routes directly connected to a management interface.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv4 static routes congured for the management port. Use the management
route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported Releases 10.2.2E or later
54 Getting Started