Users Guide

Default Maximum burst size is 50 kb
Command Mode POLICY-MAP-CLASS-MAP
Usage Information Only the ingress QoS policy type supports this command. You must enter both the minimum and maximum values.
If you enter the rate value in pps, the burst provided is in packets. If you enter the rate in kbps or mbps, the burst is
provided in kb.
Example
OS10(conf-pmap-c-que)# shape min kbps 11 max kbps 44
Supported Releases 10.2.0E or later
show class-map
Displays conguration details of all existing class-maps.
Syntax
show class-map [type {control-plane | qos | queuing | network-qos} class-map-
name]
Parameters
• type — Enter the policy-map type (qos, queuing, or control-plane).
• qos — Displays all policy-maps of qos type.
• queuing — Displays all policy-maps of queuing type.
• network-qos — Displays all policy-maps of network-qos type.
• control-plane — Displays all policy-maps of control-plane type.
• class-map-name — Displays the QoS class-map name.
Default Not congured
Command Mode EXEC
Usage Information This command displays all class-maps of qos, queuing, network-qos, or control-plane type. The
class-map-name parameter displays all details of a congured class-map name.
Example
OS10# show class-map type qos c1
Class-map (qos): c1 (match-all)
Match(not): ip-any dscp 10
Supported Releases 10.2.0E or later
show control-plane info
Displays control-plane queue mapping and rate limits.
Syntax
show control-plane info
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Monitors statistics for the control-plane and to troubleshoot CoPP.
Example
OS10# show control-plane info
Queue Rate Limit(in pps) Protocols
0 600
472 Quality of service