Reference Guide

After you install OS10 and log in, install the license to run the OS10 Enterprise Edition beyond the trial license period. See Download OS10
image and license for complete information. The OS10 license is installed in the /mnt/license directory.
1 Download the License.zip le from DDL as described in Download OS10 image and license.
2 Open the zip le and locate the license le in the Dell folder. Copy the license le to a local or remote workstation.
3 Install the license le from the workstation in EXEC mode.
license install {ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:} filepath/filename
• ftp://userid:passwd@hostip/filepath — Copy from a remote FTP server
• http://hostip/filepath — Copy from a remote HTTP server
• http://hostip — Send request to a remote HTTP server.
• localfs://filepath — Install from a local le directory.
• scp://userid:passwd@hostip/filepath — Copy from a remote SCP server.
• sftp://userid:passwd@hostip/filepath — Copy from a remote SFTP server.
• tftp://hostip/filepath — Copy from a remote TFTP server.
• usb://filepath — Install from a le directory on a storage device connected to the USB storage port on the switch.
• filepath/filename — Enter the directory path where the license le is stored.
Install license
OS10# license install scp://user:userpwd@10.1.1.10/CFNNX42-NOSEnterprise-License.xml
License installation success.
Verify license installation
OS10# show license status
System Information
------------------------------------------
Vendor Name : DELL
Product Name : S4048-ON
Hardware Version: A00
Platform Name : S4048-ON
PPID : CN0M68YC2829855M0133
Service Tag : CFNNX42
License Details
----------------
Software : OS10-Enterprise
Version : 10.3.0E
License Type : PERPETUAL License
Duration: Unlimited License
Status : Active
License location: /mnt/license/CFNNX42.lic
------------------------------------------
Troubleshoot license installation failure
An error message displays if the installation fails.
License installation failed
1 Verify the installation path to the local or remote location you tried to download the license from.
2 Check the log on the remote server to see why the FTP or TFTP le transfer failed.
3 Ping the remote server from the switch — use the ping and traceroute commands to test network connectivity. If the ping fails:
• Check if a Management route is congured on the switch. If not, use the management route command to congure a route to
the server network.
• Install the server with the license le on the same subnet as switch.
4 Check if the server is up and running.
Getting Started
25