Users Guide

UFD system log message reference
This section lists the system log messages that are generated by the UFD process.
Table 48. UFD system log messages
System log message Severity Description Recommended action
%UFD_ERROR_SET: Interface
set to UFD Error :
Informational This log is displayed when the
downstream interface is set to
disabled due to upstream interfaces
going down.
No action required.
%UFD_ERROR_CLR: Interface
cleared from UFD Error :
Informational This log is displayed when the
upstream interfaces come up or
when you execute the clear ufd-
disable uplink-state-group
<1> command, which will clear the
downstream interface from disabled
state..
No action required.
%UFD_GRP_ERROR_SET: Uplink
State Group moved to Error state
- Group id:
Informational This log is displayed when the port
channel member interface is added to
the Uplink state group.
No action required.
%UFD_GRP_ERROR_CLR:
Uplink State Group moved out of
Error state - Group id:
Informational This log is displayed when the port
channel member interface is removed
from the Uplink state group.
No action required.
49
76 UFD system log message reference