Users Guide

Static and dynamic route system log
message reference
This section lists the system log message for static and dynamic route with prefix greater than 64 and less than 128 when the
IPv6 extended prefix is not configured from OS10 release 10.5.2.1.
Table 44. Static and dynamic route
System log message Severity Description Recommended action
IPv6 Extended Prefix support not
configured - Unable to program
routes with prefix length greater
than 64 and less than 128.
Informational This system log message is generated
when you try to attach a program to
IPv6 route with prefix length greater
than 64 and less than 128 when IPv6
extended prefix is not configured.
You must configure hardware
l3 IPv6 extended prefix or
else addresses greater tan /
64 will not be programmed.
For more information on
configuring IPv6-extended
prefix, see https://
www.dell.com/support/
manuals/en-us/dell-emc-
smartfabric-os10/
smartfabric-os-user-
guide-10-5-2/hardware-l3-
ipv6-extended-prefix?
guid=guid-889ed6e9-9728-4
9e4-9a7c-
d35f80663188&lang=en-us
45
72 Static and dynamic route system log message reference