Users Guide

Table 43. Scale VLAN profile (continued)
System log message Severity Description Recommended action
Anycast IPv6 Address in Scaled
VLAN profile
Scale VLAN profile, which is globally
enabled and L3 mode is not configured.
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs to
be enabled for VRF association in
Scaled VLAN profile
Informational This system log message is generated
when a VRF is associated on the VLAN
interface with Scale VLAN profile, which
globally enabled and L3 mode is not
configured.
Configure and enable
mode L3 to associate
a VRF to a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs to
be enabled for configuring VRRP
IPv4 Group in Scaled VLAN profile
Informational This system log message is generated
when Virtual IPv4 address of VRRP
V4 Group is configured on the VLAN
interface with Scale VLAN profile, which
is globally enabled and L3 mode is not
configured.
Configure and enable mode
L3 to configure VRRP
IPv4 group in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs to
be enabled for configuring VRRP
IPv6 Group in Scaled VLAN profile
Informational This system log message is generated
when Virtual IPv6 address of a VRRP V6
Group is configured on a VLAN interface
with Scale VLAN profile, which globally
enabled and L3 mode is not configured.
Configure and enable mode
L3 to configure VRRP
IPv6 group in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs to
be enabled for disabling NTP in
Scaled VLAN profile
Informational This system log message is generated
when NTP is disabled on a VLAN
interface with Scale VLAN profile, which
is globally enabled and L3 mode is not
configured.
Configure and enable mode
L3 to disable NTP in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
70 Scale VLAN profile system log message reference