Users Guide

Scale VLAN profile system log message
reference
This section lists the system log message for Scale VLAN Profile and L3 configuration when L3 mode is not configured from
OS10 release 10.5.2.3.
Table 43. Scale VLAN profile
System log message Severity Description Recommended action
Mode L3 configuration needs to
be enabled for configuring IPv4
Address in Scaled VLAN profile
Informational This system log message is generated
when an IPv4 address is configured on
the VLAN interface with scale VLAN
profile, which is globally enabled and L3
mode is not configured.
Configure and enable mode
L3 to configure IPv4
address in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs to
be enabled for configuring IPv6
Address in Scaled VLAN profile
Informational This system log message is generated
when IPv6 address is configured on a
VLAN interface with scale VLAN profile,
which is globally enabled and L3 mode is
not configured.
Configure and enable mode
L3 to configure IPv6
address in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs
to be enabled for configuring
Anycast IPv4 Address in Scaled
VLAN profile
Informational This system log message is generated
when an Anycast IPv4 address is
configured on the VLAN interface with
Scale VLAN profile, which is globally
enabled and L3 mode is not configured.
Configure and enable mode
L3 to configure anycast
Pv4 address in a scaled
VLAN profile. For more
information on configuring
scaled VLAN profile,
see https://www.dell.com/
support/manuals/en-us/
dell-emc-smartfabric-
os10/smartfabric-os-
user-guide-10-5-2/mode-
l3?guid=guid-1af511a6-
ea2f-491b-a619-
fd8ed238104f&lang=en-us
Mode L3 configuration needs
to be enabled for configuring
Informational This system log message is generated
when an Anycast IPv6 address is
configured on a VLAN interface with
Configure and enable mode
L3 to configure IPv6
address in a scaled
44
Scale VLAN profile system log message reference 69