Users Guide

NDM system log message reference
This section lists the system log messages that are generated by the NDM process.
Table 32. NDM system log messages
System log message Severity Description Recommended action
%NDM_SYSTEM_RELOAD: User
request to reload system
Informational You will see this message if you have
run the reload command.
No action required.
%NDM_SPEED_MISMATCH:
VLTi member speed doesn't
match.
Informational You will see this message when ports
with different speeds are configured as
VLT discovery-interfaces. Only ports
with matching speeds will be added
as ICL members (port channel 1000.
Check "show port-channel summary
output). Other ports with different
speeds are not added to ICL.
Identify the member ports
of the VLTi configured
and remove the member
port with mismatched speed.
Refer Chapter 22: Virtual
Link Trunking->Configure
VLT->Configure the VLT in
the Dell EMC SmartFabric
OS10 User Guide.i
33
NDM system log message reference 55