Users Guide

ISCSI system log message reference
This section lists the system log messages that are generated by the ISCSI process.
Table 24. ISCSI system log messages
System log message Severity Description Recommended action
%ISCSI_GLB_ENABLE:
ISCSI_OPT: ISCSI Globally
enabled. Trigger Auto-config
Informational Indicates the configuration of iSCSI
Auto-config has been successful.
Configurations are going on.
No action required.
%ISCSI_GLB_DISABLE:
ISCSI_OPT: ISCSI Globally
disabled.
Informational Indicates disabling of iSCSI Auto
config feature.
No action required.
%ISCSI_STORAGE_PRESENT:
ISCSI_OPT: Storage device is
connected to switch.
Informational Storage device auto-detected based
on iSCSI configuration.
No action required.
%ISCSI_STORAGE_ATTACH:
ISCSI_OPT: Storage peer
attached to port
Informational Dell compliant Storage device such
as EQL is detected and attached to
the port.
No action required.
%ISCSI_STP_PORT_FAST:
ISCSI_OPT: Auto-config:Set stp
port-fast on port
Informational Auto-configuration log on setting
STP port-fast on Port.
No action required.
%ISCSI_STORM_CONTROL:
ISCSI_OPT: Auto-config:Disable
storm control on port
Informational On auto configuration log on storm
control configuration being removed
(if present) on port.
No action required.
%ISCSI_STORAGE_DETTACH:
ISCSI_OPT: Storage peer
dettached from port
Informational Dell compliant Storage device such
as EQL is detached from port.
No action required.
%ISCSI_NEW_PORT_FC:
ISCSI_OPT: Set flow control for
the new port added
Informational Log on flow control added for new
port added.
No action required.
%ISCSI_NEW_PORT_MTU:
ISCSI_OPT: Set max mtu for the
new port added
Informational Log on MTU max value set on the
port.
No action required.
%ISCSI_OPT_NEW_TCP_CONN:
ISCSI_OPT: New iSCSI
Connection Discovered. Src ip
Informational New iSCSI session discovered log
with IP and port information.
No action required.
%ISCSI_OPT_ACL_FULL:
ISCSI_OPT: Session monitoring
ACL Table reservation full
Informational ACL entries for iSCSI feature gets
exhausted. Error Returned during
iscsi session monitoring feature. It is
not possible to dynamically increase
iSCSI space. iSCSI space is static; if
the iSCSI space is not enough, You
must disable session monitoring. Re-
enable the iscsi session monitoring
feature again.
No action required.
%ISCSI_OPT_MAX_SESSION_E
XCEEDED: ISCSI_OPT: New
Connection Ignored
Informational Due to ACL restriction number
maximum number of session has
been exceeded, new connections will
get dropped. New session will get
established when old sessions gets
The system has reached its
limit. Dell EMC recommends
to disable iSCSI session
monitoring.
25
46 ISCSI system log message reference